ELEMENTS FOR SOLAR PANELS
SCIOGLIPANN is a heating film to be applied on the back of a photovoltaic panel to melt the snow, deposited above the same, and restore proper function.
The product has been designed for ease of use and, therefore, reduce installation time:
clean the back of the solar panel from dust, grease, oils and release agents (cleaning should be done with clean cloths and cleaning products suitable for the material to be cleaned and the substance to be removed)
removing the protective liner from SCIOGLIPANN and apply it on the back of the photovoltaic panel practicing a slight pressure, perhaps with a rubber roller, to ensure the perfect adhesion of the film, on the entire surface
install the solar panel and connect the connectors SCIOGLIPANN with the adjacent module up to a maximum of 12 pieces (the last female connector of the string must be enclosed with the cap)
DO NOT ever turn with temperatures above 10 ° C
The best temperature for the application of the adhesive film is comprised in a range between 18 ° C and 35 ° C. In the case of applications at lower temperatures the strength of initial adhesion decreases.
For a correct preservation of the product during storage it is recommended not to exceed 1 year at a temperature of 20 ° C, normal humidity of between 50 and 70% and the absence of exposure to UV rays.